300-410 STUDY REFERENCE | TEST 300-410 PREPARATION

300-410 Study Reference | Test 300-410 Preparation

300-410 Study Reference | Test 300-410 Preparation

Blog Article

Tags: 300-410 Study Reference, Test 300-410 Preparation, 300-410 Test Questions Fee, Dumps 300-410 Reviews, 300-410 Valid Practice Materials

Our 300-410 study materials perhaps can become your new attempt. In fact, learning our 300-410 study materials is a good way to inspire your spirits. In addition, it is necessary to improve your capacity in work if you want to make achievements. At present, many office workers choose to buy 300-410 our study materials to enrich themselves. If you still do nothing, you will be fired sooner or later. God will help those who help themselves. Come to snap up our 300-410 exam guide.

Conclusion

As you can see, you should know a lot about this test and learn even more. Therefore, if you aspire to show your skills and mastery in the field of networking technologies, then the Cisco 300-410 is the right exam for you. Go for it today and get your CCNP Enterprise certification!

The Cisco 300-410 exam consists of 60-70 multiple-choice and simulation questions that must be completed within 90 minutes. As the exam covers advanced concepts in routing and services, candidates are expected to have a strong foundation in networking concepts and experience working with Cisco routers and switches. 300-410 Exam is suitable for network engineers, network administrators, and IT professionals who want to advance their careers in enterprise networking.

>> 300-410 Study Reference <<

Test 300-410 Preparation, 300-410 Test Questions Fee

Our 300-410 learning prep boosts the self-learning, self-evaluation, statistics report, timing and test stimulation functions and each function plays their own roles to help the clients learn comprehensively. The self-learning and self-evaluation functions of our 300-410 guide materials help the clients check the results of their learning of the 300-410 Study Materials. The timing function of our 300-410 training quiz helps the learners to adjust their speed to answer the questions and keep alert and our study materials have set the timer.

Cisco Implementing Cisco Enterprise Advanced Routing and Services Sample Questions (Q589-Q594):

NEW QUESTION # 589
Refer to the exhibit.


Refer to the exhibit. The administrator is troubleshooting a BGP peering between PE1 and PE3 that is unable to establish Which action resolves the issue?

  • A. Disable sending ICMP unreachables on P2 to allow PE1 to establish a session with PE3
  • B. Ensure that the PE3 loopback address is used as a source for BGP peering to PE1
  • C. Remove the traffic filtering rules on P2 blocking the BGP communication between PE1 and PE3
  • D. P2 must have a route to PE3 to establish a BGP session to PE1

Answer: B


NEW QUESTION # 590
How are MPLS Layer 3 VPN services deployed?

  • A. The import and export RT values under a VRF must always be the same.
  • B. The RD and RT values must match under the VRR
  • C. The RD and RT values under a VRF must match on the remote PE router
  • D. The label switch path must be available between the local and remote PE routers.

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/65x/b-l3vpn-cg-ncs5500-65x/b-l3vpn-cg-ncs5500-65x_chapter_010.html The ingress PE router must be able to reach the egress PE router for a packet to be relayed to its destination.


NEW QUESTION # 591

Refer to the exhibit. An engineer examines the BGP update for the IPv6 prefix 2001:db8::1/128. which should have been summarized into a /64 prefix. Which sequence of actions achieves the summarization?

  • A. R1 is a route reflector client of a RR with a router ID of 1.1.1.1. and the originator of the prefix has a router ID of 3.3.3.3. Both routers belong to different ASs. The prefix is not advertised to any peer and must be advertised using the network statement on R3.
  • B. R1 is a route reflector with a router ID of 1.111. and the originator of the prefix is a route reflector client, which has a router ID of 3.3.3.3. Both routers belong to the same AS Configure an aggregate address on the router with ID 1.1.1.1 for the prefix
  • C. R1 is a route reflector with a router ID of 3.3.3.3. and the originator of the prefix is a route reflector client, which has a router ID of 3.3.3.3. Both routers belong to the same AS Configure an aggregate address on the router with ID 1.1.1.1 for the prefix
  • D. R1 is a route reflector client of a RR with a router ID of 1.1.1.1. and the originator of the prefix has a router ID of 3.3.3.3. Both routers belong to the same AS. Configure an aggregate address on the router with ID 3 3.3.3 for the prefix.

Answer: D


NEW QUESTION # 592

Refer to the exhibit R1 cannot establish a neighbor relationship with R2 Which action resolves the issue"?

  • A. Configure the neighbor 2.2.2.2 command on R1 under the OSPF process
  • B. Configure the ip ospf network broadcast command on the interfaces of R1 and R2
  • C. Configure the mtu Ignore command on the Interfaces of R1 and R2
  • D. Configure the ip ospf network point-to-point command on the interfaces of R1 and R2

Answer: C

Explanation:
In OSPF (Open Shortest Path First), the MTU (Maximum Transmission Unit) size must match on both sides of a link for OSPF neighbors to form an adjacency12. If the MTU sizes do not match, the OSPF adjacency will not form, and the routers will not become neighbors12.
In this case, R1 cannot establish a neighbor relationship with R2. One possible reason for this could be a mismatch in the MTU size on the interfaces of R1 and R212.
To resolve this issue, you can configure the mtu ignore command on the interfaces of R1 and R2 (Option A). This command allows OSPF to ignore the MTU size when determining if it can form an adjacency with a neighbor12. This means that even if the MTU sizes do not match, OSPF will still form an adjacency, and R1 and R2 will become neighbors12.
References:
* OSPF MTU Mismatch - NetworkLessons.com
* Understanding OSPF MTU Mismatch Conditions and Solutions - Cisco


NEW QUESTION # 593
Exhibit:

NTP is configured across the network infrastructure and Cisco DNA Center. An NTP issue was reported on the Cisco DNA Center at 17:15. Which action resolves the issue?

  • A. Check and resolve reachability between the WLC and the NTP server
  • B. Reset the NTP server to resolve any synchronization issues for all devices
  • C. Check and resolve reachability between Cisco DNA Center and the NTP server
  • D. Check and configure NTP on the WLC and synchronize with Cisco DNA Center

Answer: D

Explanation:
Excessive time lag between Cisco DNA Center and device: The time difference between Cisco DNA Center and the device IP Address has drifted too far apart. CiscoDNA Center cannot process the device data accurately if the time difference is more than 3 minutes.


NEW QUESTION # 594
......

In this version, you don't need an active internet connection to use the 300-410 practice test software. This software mimics the style of real test so that users find out pattern of the real test and kill the exam anxiety. TroytecDumps offline practice exam is customizable and users can change questions and duration of Implementing Cisco Enterprise Advanced Routing and Services (300-410) mock tests. All the given practice questions in the desktop software are identical to the Implementing Cisco Enterprise Advanced Routing and Services (300-410) actual test.

Test 300-410 Preparation: https://www.troytecdumps.com/300-410-troytec-exam-dumps.html

Report this page